Automakers must think outside the box to comply with emission standards as they get stern with time. Advanced technology has already overcome the internal combustion engines, but manufacturers are still trying to balance efficiency and performance. The exhaust Gas Recirculation (EGR) system was introduced as an effective method to reduce NO emission. While consumers sometimes find it troublesome because it decreases the efficiency of the engine. That is why Cummins EGR delete kit was launched to help increase performance and decrease the fuel consumption of vehicles.
How Does Exhaust Gas Recirculation Work?
The major component of air is nitrogen, but when it comes in contact with high temperatures, it produces harmful compounds. The inert nitrogen gas gets activated in the engine and creates harmful oxides of nitrogen like (NO) in the combustion engine, which are released into the atmosphere. EGR valve is installed in the vehicles to save the environment from these harmful nitrogen compounds.
The EGR valve allows the exhaust gases to reenter the system with less oxygen. This new mixture takes more time to burn, lowers the temperature of the combustion engine, and decreases the formation of nitrogen oxide.
The EGR valve has two positions: open position and closed position. When the vehicle is at rest, the valve is closed, but when the engine starts, the valve gradually starts to open. At idle or at slow speed, the EGR valve is open up to 90 percent, but during high speed, the EGR valve is closed to ensure enough amount of oxygen in the cylinder.
Why Do You Need an EGR Delete Kit?
While the EGR system is beneficial for the environment, it has some negative impacts on engine performance. Therefore, the EGR delete kit has gained popularity among diesel truck owners. The EGR Cummins delete kit has many benefits, but the most admired is improved engine performance. Additionally, it reduces the carbon buildup and improves the airflow to the engine, which results in improved throttle response, greater horsepower, and reduced fuel consumption.
EGR system causes damage to the engine due to carbon buildup. Removing EGR will increase the lifespan of your engine. EGR system can be affected by malfunctioning like any other part of the vehicle, and it will impact the overall performance.
Best EGR Delete Kits
Here are the 2 best-performing EGR delete kits:
1 6.7L Cummins EGR Delete Kit For 2007-2018 Dodge Ram
This 6.7 Cummins delete kit is made of high-grade aluminum material, which is highly durable and temperature resistant. It increases the torque, resulting in increased horsepower and better fuel economy. It contains throttle valve delete, gasket, and bolts that are ready for easy installation.
2 6.7L Powerstroke EGR Cooler Delete Kit for Ford 2011–2023
Ford 6.7L powerstroke delete kit serves to remove the problematic EGR valve and cooler. It’s an affordable, high-quality kit and works for models 2011-2023. It comes with all the necessary tools, including block-off plates, plugs, and clamps.
How to Install an EGR Delete Kit?
EGR delete kit includes many parts that should be installed properly. Otherwise, it can cause problems. There are several types of EGR powerstroke delete kits, each with specific components. Most parts are common in all kits, including pipe, bolts, gasket, O-rings, nuts, hose, and hose clamps. You should properly follow the below-mentioned steps to install an EGR delete kit in your truck.
Step 1: Initial Preparation
· Remove the cables of the battery.
· Allow the engine to cool down.
· Disconnect the MAP sensor.
· Take out the air box.
· Remove the filter of air intake.
· Find the connection of the intake pipe.
· Disconnect the clamps of the intake pipe.
Step 2: Remove Electrical Connection
· Remove the vacuum line.
· Detach the solenoid clips.
· Disconnect electrical connections.
Step 3: Detach the Coolant Lines
· Drain approximately a gallon of coolant.
· Uncouple the upper coolant lines.
· Disconnect the EGR pipe.
· Remove the bolt.
· Take out the cooler manifolds.
· Detach the rear EGR pipe.
· Now, disconnect the lower coolant lines.
Step 4: Installation
· Put turbo block off plates.
· Install plates with the help of bolts.
· Attach the anterior coolant lines to block off the plate.
· Plug the inferior coolant line in the block-off bracket and the upper coolant line in the hose.
Step 6: Replacement
· Put back all the parts you took off (including pipes, tubes, and electrical connections).
· Now, start the engine and test the EGR delete kit.
Exhaust Gas Recirculation system helps keep the environment clean of combustion gases but results in the carbon buildup in filters. Therefore, using an EGR delete kit is the ultimate solution to save your truck engine. EGR delete kit will increase the engine performance, reduce fuel consumption, and improve horsepower.
